Puns

I asked my probe how it stays so calm under pressure.

The angle beam probe never answers a question directly.

I'm a straight beam person in an angle beam world.

The thickness gauge is great in relationships.

The Phased Array Ultrasonic Testing crew is never late.

I trust Time-of-Flight Diffraction with my crack sizing.

The A-scan promised to work on its resolution this year.

The C-scan is the only one in the family who sees the big picture.

I turned the gain down to get rid of the grass.

Nobody in the dead zone ever gets noticed.

I keep my calibration block on a pedestal.

The surface wave probe is the most superficial tool in the kit.

The BNC connector is the most stubborn member of the crew.

Our Level III is a lot like a back wall echo.

The couplant promised it would always fill the gap in my life.

My family group chat works like Ultrasonic Testing.

In the phased array, every element thinks it's the lead.

My probe wedge wore down on one side.

The back wall echo has great self-esteem.

I tried Eddy Current Testing on my relationship.

I admire Eddy Current Testing's honesty.

The bobbin coil loves its job.

Paint is the best teacher in Eddy Current Testing.

The eddy current technician refused to sit at the end of the table.

The eddy current technician always wins at chess.

Copper and aluminum argued about who is more conductive.

Ferromagnetic materials are the drama queens of Eddy Current Testing.

The rotating probe never loses an argument.

The differential probe is very judgmental.

Shielded probes keep their fields to themselves.

I told the beam it had to follow Snell's law.

Steel and air have the worst impedance mismatch in the shop.

My high-frequency probe and I have a lot in common.

The inverse square law says doubling your distance cuts the intensity to a quarter.

Half-life is how long it takes for half of a source to go away.

Magnetic domains are just tiny crowds.

I tried to explain damping to my kids.

What does the Doppler effect have in common with a client deadline?

A flaw is like a good secret.

A standing wave has a great job.

Everyone said the darkroom tech was negative. He said he was just developing his character.

The image quality indicator is the only coworker whose whole job is proving the rest of us can see.

Gamma rays are bad at stand-up. Every joke goes straight through the audience.

Radiographers set the best boundaries. Theirs come with tape, rope, and a survey meter.

Inverse square law: the only place where doubling the distance divides your problems by four.

A collimator is the best manager on the crew: it keeps everyone pointed the same way.

My survey meter and I have a healthy relationship. It keeps me informed and I keep my distance.

Backscatter is just radiation coming back to see if you remembered the lead letter B.

A radiograph that comes out too dark is simply in a bad mood. It has density issues.

Fixer is the one chemical in the darkroom that really helps film move on.

Fine-grain film is like a thorough Level III: it takes its time, and the detail is worth the wait.

A radiographer never judges a part by its cover. She prefers to see what's inside.

Radiographers are the only people who shout 'Radiation!' on a job site and have everyone nearby relieved they said it.

Geometric unsharpness is a radiograph's polite way of saying your source was too big for the job.

A step wedge is a staircase that never goes anywhere, but it shows you exactly how far you've come.

Lead is the only worker who gets praised for letting nothing through.

A good Magnetic Particle inspector has a field of expertise and a strong sense of direction.

A yoke is only interested in longitudinal relationships.

Prods are great for starting conversations. Unfortunately, so are arc strikes.

Magnetic particles are gossips. They gather wherever there's a leak.

Demagnetizing taught me patience. You can't force a part to forget. You have to walk it away slowly.

A residual field is just magnetism that refuses to move on.

Fluorescent particles are the life of the party, but only if someone turns the lights off first.

A central conductor does all the work and lets the part take the credit for the circular field.

Dry powder is the introvert of magnetic particles. Blow on it and it leaves the party.

The pie field indicator doesn't taste good, but it gives you a slice of information.

Fluorescent Magnetic Particle Testing is a bright idea in a dark booth.

At a crack, the part's field leaks out. It's finally letting its guard down.

Penetrant Testing is the only method where the part has to be cleaned before it gets any attention, and cleaned again after.

Developer is the best listener in the shop. It gets every crack to open up and tell its story.

Penetrant is the only guest who is told to wait the full dwell time and still gets blamed for the mark it leaves.

Bleed-out is just a crack finally showing its colors.

A good penetrant has low surface tension and high curiosity.

White developer is a blank canvas where the cracks do all the painting.

Dirt in a crack is the part's best lawyer. It keeps the penetrant from testifying.

Visible red dye penetrant is easy to embarrass. It's always red in the face.

Fluorescent penetrant inspectors are real glow-getters.

Emulsifier is the peacemaker that finally gets oil-based penetrant and water to work things out.

Capillary action is just penetrant being nosy about every opening.

Penetrant Testing only has surface-level relationships. If a discontinuity doesn't break the surface, we never meet.

I got a new borescope for the shop. It really gets to the root of things.

The weld gauge and the fillet gauge got along great. They always measured up.

I'd tell you a joke about Visual Testing, but you'd have to see it to believe it.

The inspection mirror spent the whole shift reflecting on its choices.

Borescope inspection is the one job where it's flattering to be told you have a narrow point of view.

The booth lighting upgrade was a bright idea. The inspectors have never been so enlightened.

I wanted to be a Visual Testing inspector, but I just couldn't see myself doing it.

I trust that fillet weld. Both legs measured up to three-sixteenths, so it's leg-it.

My magnifying glass is the most dramatic tool I own. It blows everything out of proportion.

The drone that inspected the flare stack was a real hoverachiever.

The telescoping inspection mirror finally gave the inspector a handle on the situation.

Bubble leak testing taught me that even a tiny leak always makes a scene.

Acoustic Emission is the one method where the part really does crack up.

The infrared camera found the problem right away. It had a hot tip.

Guided wave testing is a long-distance relationship that works: you send out a wave and hear back from every weld along the way.

The Magnetic Flux Leakage scanner is a great listener. It picks up everything that leaks out.

Alternating Current Field Measurement found the crack right through the paint. It was a field day.

Shearography is the only inspection that works because of a little tension.

Bond testing is a real relationship method: you tap, you listen, and you find out where the commitment is weak.

Pressure decay testing is all about patience. You wait, and things go downhill.

I trust my reference block completely. It's the standard I hold myself to.

Probe cables are a lot like holiday lights. They all worked perfectly the last time you packed them.

My instrument battery died at the top of the tower. It was a low point at a high altitude.

The firmware update gave my instrument a new lease on life and a menu I'll never find.

Couplant and I have a lot in common. We both smooth things over.

Running out of couplant is the most slippery slope in the field.

The wedge's attitude was the problem. It was always at an angle.

My instrument case was very heavy on the stairs. It really weighed on me.

The reference block never apologizes for its flaws.

Our new instrument has a touchscreen, and it's very sensitive. Mostly to gloves.

The weld had porosity. It was full of holes and still insisted it was solid.

Slag inclusions are the only things in the weld that feel left out and included at the same time.

Incomplete fusion is just a weld with commitment issues.

The plate looked solid until a lamination showed it had layers of hidden meaning.

Undercut is the weld's way of cutting corners, one groove at a time.

Corrosion is the original slow burn.

A fatigue crack is proof that persistence pays off, a little more every cycle.

Hydrogen cracking is the only discontinuity that waits until everyone has gone home.

Pitting corrosion is a small problem with a deep reputation.

Nonrelevant indications are the ones that show up, make noise, and leave without ever being written on a report.

Experience hours have a half-life. Log them this week, or half of them will have decayed by Friday.

Level III exams are open book. The answers are open to interpretation.

I passed the general exam and failed the specific one. Turns out being generally right is not a technique.

I treat my renewal date like a discontinuity. I find it, document it and never let it become a defect.

Taking the practical exam is like Penetrant Testing: you wait through the dwell time, and then everything you did wrong shows up in bright color.

I'm certified in two methods and uncertain about everything else.

The written practice is the only document that knows my eye exam date better than I do.

I failed Magnetic Particle Testing the first time. The second time I was more attracted to the material.

The Level III exam asks you to 'discuss.' Discuss is Latin for 'keep writing until the proctor takes the paper away.'

The Level III basic exam is the only time 'basic' means 'covers everything ever written.'

The bubble sheet is the one place where a technician is encouraged to fill in the blanks completely.

'Shall' means do it. 'Should' means do it unless you can explain why in writing.

Mandatory appendix: the only appendix you can't have removed.

Code book humor is like a mandatory appendix: dry, well referenced, and nobody asked for it.

An addendum is the standard politely saying it learned something.

The vessel passed the hydrotest. The paperwork is still under pressure.

A cross-reference is the code's version of 'see me after class.'

Acceptance criteria: because 'looks good to me' doesn't have a table number.

An 'informative' appendix is the code's way of handing you a flashlight, not an order.

When two clauses disagree, the inspector doesn't flip a coin.

When two codes disagree about one weld, the only thing both will accept is a longer conversation.

The fit-up was so bad the welder said, 'It's just a gap in communication.'

I asked the welder if the preheat was done. She showed me the temperature crayon and said, 'The plate warmed up to the idea.'

Welders have a great sense of humor. It's just a slow burn.

The weld symbol said fillet, one-quarter inch, both sides, all around. The welder said, 'So basically, a hug.'

A tack weld is just a weld that's afraid of commitment.

The weld looked great on the surface. It was going through a lot underneath.

Grinding is the art of apologizing to a weld, one pass at a time.

Welders say the weld is done when it's cool. Inspectors say it's done when it's cooled, cleaned, and cleared.

Porosity in a weld is just the weld's way of saying it needed some air.

Repair welds are the only second chances that come with a grinder.

Inspection: two hours. Report: two days. Turns out time-of-flight is only fast for the sound.

My report has three signatures and two sets of initials. It's the only group project where everyone actually reads the whole thing.

My sketch has every weld number, every dimension, and a tiny north arrow. It's my masterpiece.

My data file has a backup, and the backup has a backup.

My report has a lot of tabs open.

The report had a lot of attachments. Mostly emotional.

My initials are the most widely published author in the shop.

Proofreading a report is like Radiographic Testing: you can't see the problem until you hold it up to the light and squint.

A report without a signature is like a Penetrant Testing job without developer: everything was done, but nothing shows.

The refinery turnaround went so well that on day three the crew did exactly what the name says.

The per diem rate has the same problem as a worn probe.

The safety coordinator said I needed a hot work permit before I could use the grinder.

I've figured out why it's called the graveyard shift.

Our rope access crew has outstanding morale.

The confined space attendant takes her job seriously.

Wind turbine technicians never complain about the job.

The aircraft inspector checked every lockwire on the engine twice.

Rail inspectors never get lost.

The ship's inspector said the ballast tank inspection was going badly.

Bridge inspectors are the only people who never burn bridges.

The best-informed member of any pipeline crew is the pig.

The machinist said the new fixture was a perfect fit.

Nuclear plant outage crews have a special kind of job security.

Site orientation is a lot like a movie premiere.

Radiographic film is a lot like a good friend.

The new instrument claims it boots up in no time.

On a coverage plot, white space is not a design choice.

Scope creep is the only crack that grows without any cyclic loading.

A repair weld is a lot like a second draft.

The pipeline crew says they run like a well-oiled machine.

We sharpened our pencils before the big tank job.

The schedule says the tank job has zero float.

A good joke and an Ultrasonic Testing pulse have a lot in common.

The forecast said the rain would clear by Monday.

Iridium-192 loses half its strength in about 74 days.

The weld felt much calmer after heat treatment.

On a turnaround, overtime is a team sport.

I tried to couple the probe to a dry part.

A project has three priority levels: high, urgent, and 'Where are we on this?'

Corrosion under insulation is the original cover-up.

The distillation column inspector says the job is all about fractions, especially thirty-seconds of an inch.

That pipe elbow has had a rough life. Everything keeps running into it.

The turbine blade inspector was always on edge. Leading edge, to be exact.

Steam generator inspection is a tube-ular career.

I asked the turbine inspector how the rotor looked. 'Balanced,' he said. 'To the ounce.'

A delamination is just a laminate that needed some space.

Bolt hole inspection is never boring. It's just full of bores.

The dig crew worked all day and finally got to the bottom of it.

A pipeline career is full of ups and downs, mostly depending on the ditch.

The pipeline inspector always walks the line. Mostly because the truck got stuck.

Submarine hull inspectors really dive into the details.

In a ballast tank you have to keep a level head. The tank rarely does.

The dry dock schedule keeps floating. The ship never does.

The bridge inspector refused to join the committee. He said he already does enough pier review.

The gearbox borescope gets along with everyone. It's great at getting to the root of the problem.

The tower flange bolts went on a team retreat. They said it was the first time they were all on the same torque.

A forging with a lap proves some parts just fold under pressure.

The Magnetic Particle Testing crew was great at their job. They were really drawn to it.

The inspector at the end of the conveyor is always on a roll.

Ultrasonic Testing of a wheel axle is a real turning point in the part's career.

The rail inspector never worries about job security. He says it has deep roots and plenty of ties.

Rail inspectors have an easy time making decisions. They just follow the line.

I passed my color vision test with flying colors. Technically, that's the only way to pass it.

I read the new edition of the code book cover to cover. It's a real page turner, and I did turn every page.

My hand warmer and my glove have excellent contact. No couplant needed.

Every kickoff meeting in January starts by breaking the ice. Ours was on the walkway.

I tried to keep my cool next to the 300 °F pipe. The thermometer suggested I keep my distance.

Sunscreen is just surface preparation for people.

The booth demo was so good I went back for a second look. Excellent repeatability.

Networking is couplant for careers: it fills the gap so the signal can pass between people.

Our records are completely traceable.

The auditor said our quality manual was a heavy-duty document. She was right.

At a turnaround the unit is down, but the pressure is definitely up.

The turnaround scope was frozen on Monday. By Wednesday it had thawed, grown, and added an exchanger.

Eddy currents flow in circles, which makes them the only thing at the outage that never needs directions.

An outage is a power plant's way of saying 'We're out, but you're in.'

The holiday lights failed Visual Testing: one bulb out, and the whole strand rejected.

The last shift before the break is the only time 'wrap it up' is both an instruction and a decoration.

Day three of the heavy check, and the aircraft finally opened up to the inspector.

The inspector told the first row of fastener holes she was with them for the long haul.

I asked the inspector how the hull plate was doing.

The undocking date arrived with inspection items still open.

The welder and the inspector were both responsible for the girth weld.

After three days of rain, the spread crawled through the right-of-way.

The inspector and the snooper truck operator wanted to bridge their differences.

The old girder told the inspector it was tired.

The flange bolts told the inspector they were under a lot of tension.

Low-wind season is when the turbines finally get a rest.

The rail flaw detection crew says theirs is the only job where being on track is a requirement.

Rail flaw detection is a job that takes you places.

At year-end the production line gets so busy that even the castings feel the pressure.

The first-article part finally met the drawing.